The FOA is beginning a study of jobs in the fiber optic industry. Here is a compilation of job descriptions furnished by John Childs, Advanced Technology Group. Our intent is to publish job descriptions for as many fiber optic jobs as possible. If you wish to contribute to this list, email us!
The FOA is posting fiber optic jobs, a listing of fiber optic job titles and job descriptions and a list of search firms specializing in fiber optics.
 
Director, Advanced Technology
Candidate will be responsible for a team of engineers working on the design
and implementation of advanced optical transmission sub-systems. Duties will
include the overall management of the team as well as the interface with the
Systems and Sub-Systems Engineering Groups for the transfer of the advanced
technology to the final development stages.
· At least 8 years experience in the Optical Transport Systems
Engineering, including design, modeling, and implementation of advanced
optical transmission.
· Must have an extensive knowledge of present optical transport
products and must have followed the state-of-the-art technological
developments in the field optical transport.
· Ph.D. in Electrical Engineering, specifically in Optical
Telecommunication Systems, or equivalent.
 
Optical Systems Engineer
You will work on the system design aspects of advanced optical transmission
sub-systems. Your duties will include numerical simulation and/or
experimental work on an optical system test-bed, for the system requirements
definition, characterization, and performance assessment of advanced optical
sub-systems.
· Must have at least 3 years experience in the field of optical
transport systems, including design, modeling, and implementation of
advanced optical transmission systems or sub-systems
· MS or Ph.D. in Electrical / Optical Engineering, with focus on
Optical Communications, or equivalent.
 
Optical Engineer
You will work on the design aspects of advanced optical transmission
sub-systems. Your duties will include numerical and experimental design,
implementation, and performance assessment of complex optical
functionalities.
· Must have at least 3 years experience in the field of optical
transport systems, including design, modeling, and implementation of
advanced optical transmission systems.
· Familiarity with commercial modeling tools (e.g., VPI, Artis) is
desired
· MSEE or Ph.D. in Electrical Engineering, specifically in Optical
Telecommunication Systems, or equivalent.
 
 
 
Photonic Systems Engineering
Optical Systems Engineer
You will work on the design aspects of advanced optical transmission
sub-systems. Your duties will include numerical simulation and experimental
work on an optical system test bed, for the performance assessment and
systems characterization of Xtera optical sub-systems.
· Must have at least 3 years experience in the field of optical
transport systems, including design, modeling, and implementation of
advanced optical transmission systems or sub-systems
· Familiarity with commercial modeling tools (e.g., VPI, Artis) is
desired
· MSEE or Ph.D. in Electrical Engineering, specifically in Optical
Telecommunication Systems, or equivalent.
 
Optical Systems Engineer
You will work on the system design aspects of optical transmission
sub-systems. Your duties will include experimental work on an optical system
test-bed, for the performance assessment and systems characterization of
Xtera optical sub-systems.
· Must have at least 3 years experience in the field of optical
transport systems, including design, implementation, and characterization of
optical transmission systems or sub-systems.
· MS or Ph.D. in Electrical / Optical Engineering, with focus on
Optical Communications, or equivalent.
 
Optical Systems Laboratory Technician
You will assist optical test-bed engineers and systems engineers in their
work on the optical system test-bed. Your duties will include the
maintenance of the test-bed (equipment, supplies) as well as the
participation in the different activities on the test-bed, such as assembly
of optical system experiments and various measurements.
· Must have at least 3 years experience in optical R&D laboratory
environments, preferably on optical system test-beds.
· Must have familiarity with the main concepts of optical transmission
and the relevant test equipment. Potential candidate will be able to work in
a team.
· Associate or Bachelors degree in Electrical / Optical Engineering or
equivalent.
·
Optical Systems Modeling Engineer
· You will work on the theoretical and numerical system design of
optical transmission sub-systems. Your duties will include performing
theoretical modeling and numerical simulation for the system design and
performance optimization of Xtera optical sub-systems.
· Must have at least 3 years experience in the field of optical
transport systems, including design and modeling of optical transmission
systems or sub-systems.
· Familiarity with commercial modeling tools (e.g., VPI, Artis) is
desired
· MS or Ph.D. in Electrical / Optical Engineering, with focus on
Optical Communications, or equivalent.
 
Optical Systems Test-Bed Engineer
You will work on the experimental system characterization of optical
transmission sub-systems. Your duties will include working on a system
test-bed, carrying out system performance measurements, and participating in
the maintenance and various upgrades of the test-bed.
· Must have at least 3 years experience in the field of optical
transport systems, including set-up of optical transmission test-beds and/or
characterization of optical transmission systems or sub-systems
· MS or Ph.D. in Electrical / Optical Engineering, with focus on
Optical Communications, or equivalent.
 
Photonic Sub-Systems Engineering
Analog/Mixed Signals Design Engineer
You will be responsible for the design and development of analog/power
circuitry for optical sub-systs such as fiber amplifiers. In this capacity,
and as part of a multi-disciplinary team, you will participate in the
products definition; drive the designs from concept, specifications,
prototyping, H/W test, compliance to production release. You will also drive
the boards through PCB placement and layout and work closely with the rest
of the engineering team through design, debug, integration and test.
· Potential candidate must have a detailed understanding of
analog/mixed signals circuitry and control electronic design, as well as O/E
components.
· Your experience with board level H/W design includes schematic
capture, PCB layout and logic simulation tools.
· Experience with telecom products a must.
· BSEE or MSEE with a min. of 5 years industry experience in a product
development environment.
 
Optical Component Engineer
You will be responsible for the characterization of optical - active and
passive components with the goal of collecting and analyzing data to yield
information on device performance and reliability. In this capacity, you
will work in close collaboration with Optical Sub-systs Design Engrs to
develop requirements for optical components, select vendors, develop
component performance test procedures, and review qualification reports of
prospective suppliers.
· Minimum of 2 years of relevant industry experience is required.
· Potential candidates must have a strong background in optical
components and optical laboratory test equipment.
· A thorough understanding of measurement techniques, together with
writing abilities, is desired.
· MSEE, Optical Engineering, or Physics
 
 
 
Optical Sub-Systems Design Engineer
You will lead the design and development from concept to transfer to
production - of various optical transmission sub-systems, such as
fiber-based amplifiers, OADMs etc. As part of a multi-disciplinary team, you
will be responsible for the sub-system optical specifications, the overall
performance, and the optical aspects of the assembly. Your activities will
include theoretical work, numerical modeling, experimental
work/characterization, as well as optimization.
· Minimum 3 years direct experience in the development of DWDM systems
and/or fiber amplifier is required.
· Equipped with a strong theoretical background in optical
communications, you also possess a pragmatic and methodical approach to
problem solving
· Education: MS or Ph.D. in EE, Optical Engineering, or Physics
 
Optical Sub-Systems Laboratory Technician
Your major responsibilities will be to support the development and prototype
build of next generation optical transmission sub-systems. In close
collaboration with the Optical Designers, your activities will include the
assembly, characterization, and test of complex optical functions. You will
also participate in the evaluation, ordering, and maintenance of lab
equipment.
· Minimum 2 years of experience in an optical lab environment.
· Experience with fiber-optic and electronic test equipment is
required.
· You possess excellent manual dexterity for small-assembly work.
· Experience with optical assembly is a strong asset.
· A high degree of technical aptitude and ability to work with little
direct supervision is a must.
· Associate Degree in electrical or related field, or equivalent
experience.
 
Optical Sub-Systems Modeling Engineer
In a high-energy team environment, you will be responsible for the numerical
modeling and design of next generation optical transmission sub-systems
equipment. As part of the Photonic Sub-Systs Engineering group, your duties
will include the numerical design of advanced optical functions, the
analysis of the simulation results, and the optimization of the optical
performances. The impact of your work on the architecture and overall
performance of the products will be significant.
· Potential candidate will have at least 3 years of relevant industry
experience, preferably with fiber amplifiers.
· Strong analytical and simulation skills are required.
· Familiarity with commercial modeling tools (e.g., VPI, Artis) is
desired.
· MS or Ph.D. in EE, Optical Engineering, Physics, or a related field.
 
Optical Sub-Systems Packaging Engineer
You will be responsible for the design, development, and implementation of
advanced packaging solutions for optical sub-systems modules As part of the
Photonic Sub-Systs Engineering group, you will work in close collaboration
with the H/W engineering and Physical Design groups to design the fiber
routing of each module and the optical interconnect between modules. You
will also assist in transferring the modules into production.
· Minimum experience of 3 years in the fiber-optics industry,
designing or developing packaging technology.
· Familiarity with mechanical design S/W, such as Pro/E, and thermal
analysis tools is required.
· Experience with telecom industry and CO environment is a strong
asset.
· MS in ME, Optical Engineering, or Physics or 3 years minimum
experience with a BS degree.
 
Optical Sub-Systems Test Engineer
You will be responsible for testing DWDM fiber transmission modules and
optical sub-systems. In this capacity, you will lead the definition and
automation of the test environment, develop and implement test plans to
validate design and verify product functionality and performance, design
test consoles and conduct tests, and verify test results against applicable
sub-systems requirements. You will also assist in the testing aspects during
the transfer to manufacturing. Will interact with the System, S/W, H/W, and
Optical engineers.
· Must have at least 3 years of relevant experience in the telecom.
· Familiarity with DWDM, optical laboratory test equipment, and
optical measurement is required.
· Experience with DWDM optical components (active and passive) and/or
sub-systs (optical amplifiers, OADMs&) is desired.
· BSEE or MSEE, Optical Engineering, or Physics
 
Hardware Engineering
Hardware Engineer - Analog
Candidate will be the primary analog designer working closely with other
engineers on the architectural, functional, and physical system partitioning
of state-of-the-art DWDM system. Candidate will also be involved in system
and unit level feasibility studies including power, real estate, cost and
performance. You will also contribute to requirement definition, high-level
architecture, interfaces definition, detail module design, module test, and
system integration.
· Minimum 8+ years of experience in the field of telecommunication,
preferably in the area of DWDM or SONET fiber optic transmission systems.
· Experience in analog design specifically low signal level amplifier
design, A/D, D/A, experience in interfacing to optical devices, good
understanding signal integrity issues, termination, control impedance, board
stack-up and EMI/ESD issues etc.
· Involvement in minimum of two projects from planning to release
stage, including hardware/software integration required.
· BSEE required. MSEE preferred.
 
Hardware Engineer - Technical Lead
Lead architectural, functional, and physical system partitioning of
state-of-the-art DWDM system. Lead system and unit level feasibility studies
including power, real estate, cost and performance. Lead requirement
definition, high-level architecture, interfaces definition, detail module
design, module test, and system integration. Resolve ongoing system and
module issues as they arise from start through product release stage.
· Minimum 8+ years of experience in the field of telecommunication -
specifically DWDM, hardware module and shelf level designs.
· Ideal candidate will have experience in analog design, digital
design, FPGA design and experience in interfacing to optical devices.
· Involvement in minimum of two projects from planning to release
stage, including hardware/software integration required.
· Knowledge of Bellcore standards is mandatory.
· BSEE required. MSEE preferred.
 
Processor Board Designer
Candidate responsibilities include module level requirement definition,
module architecture, module level design specification document, schematic
capture, helping with PCB layout, module level testing and integration of
the module into the rest of the system.
· Minimum 5+ years of experience in the field of telecommunication,
preferably in the area of DWDM control subsystem development.
· Candidate shall have microprocessor based board level design
experience preferably with Motorola Power QUICC II (MPC8260).
· Involvement in minimum of one project from planning to release
stage, including hardware/software integration required.
· FPGA design experience a big plus.
· BSEE required. MSEE preferred.
 
FPGA Designer
Candidate responsibilities include FPGA requirement definition, FPGA level
architecture, design specification document, coding, simulation, synthesis,
layout, post layout simulation, testing and integration of FPGA into the
rest of the system.
· Minimum 5+ years of experience in the field of telecommunication,
preferably DWDM or SONET.
· Candidate must have experience with Xilinx or Altera FPGA design,
Verilog and/or VHDL, simulation and synthesis tools.
· Involvement in minimum of one project from planning to release
stage, including hardware/software integration required.
· Board level design experience a big plus.
· BSEE required. MSEE preferred.
 
CAD Tools Engineer
Candidate responsibilities include: support for CAD tools used for schematic
capture, PCB layout and FPGA design. Provide additional scripts, software
programs, and documentation to enhance and complement the capabilities of
tools acquired from commercial software vendors. Design and implement
special functions directed at providing a productive work environment for
the Design Engineers. Perform new tool evaluation and selection. Work with
HW Engineers and PCB Layout Engineers to assure the needed tools are
available. Provide tools and methods for management and version control of
complex design databases created through the use of CAD tools.
· Minimum 5+ of experience as a CAD tools engineer.
· Candidate shall be familiar with Cadence Concept, Allegro, Mentor
FPGA Advantage tools.
· BSEE or BSCS required.
 
Physical Design Engineering
Complex Module Specialist
Responsible for the high density, thermally challenging module level design
of state of the art DWDM product at both concept and detailed design stages.
The position requires working closely with electronics and optics engineers
to design products which meet performance, compliance, manufacturability and
cost effectiveness objectives.
· Minimum 8+ years experience in the field of telecommunication,
preferably DWDM module and shelf level packaging designs.
· Experience designing for thermal, EMI, airflow, cabling, fiber
management and NEBS compliance using sheet metal, injection molded plastic,
machining and casting.
· Experience with ProEngineer and unix development environment a must.
· Involvement in minimum of two project from planning to release stage
required.
· Knowledge of Bellcore standards is mandatory.
· BSME required. MSME preferred.
·
Module Specialist
Responsible for the module level design of state of the art DWDM product at
both concept and detailed design stages. The position requires working
closely with electronics and optics engineers to design products which meet
performance, compliance, manufacturability and cost effectiveness
objectives.
· Minimum 5+ years experience in the field of telecommunication,
preferably DWDM module and shelf level packaging designs.
· Experience designing for thermal, EMI, airflow, cabling, fiber
management and NEBS compliance using sheet metal, injection molded plastic,
machining and casting.
· Experience with ProEngineer and unix development a must.
· Involvement in minimum of one project from planning to release stage
required.
· Knowledge of Bellcore standards is mandatory.
· BSME required. MS preferred.
 
Software Engineering
Senior Software Engineer - Embedded Systems Development, Multiple Positions
The candidate will be responsible for the development of a next generation
telecom product. Responsibilities include design, development and
integration of the software.
o Requires 5 to 8 years of experience in real-time embedded systems
development for telecommunications transmission products.
o Experience with C/C++, VxWorks/pSOS/OSE is a must.
o Experience with one or more of the following is required.
1. Inter processor communications
2. Software download / Software Upgrade
3. Database backup, recovery, & restoration
BSEE or BSCS, Masters preferred
 
Sr. Software Engineer, Platform Development,
The candidate will be responsible for Kernel subsystem development for a
next generation telecom product. Responsibilities include architecture,
design, development and integration of the software.
· Requires 5 to 8 years of experience in real-time embedded software
development.
· Experience with kernel development, board support Packages, Control
plane design, device drivers, MPC860 or MPC8260, C/C++, pSOS/OSE/VxWorks is
a must.
· Experience with telecommunication product development is a plus.
· BSEE or BSCS, Masters preferred
Sr. Software Engineer, Optical Module Device Drivers Development, Multiple
Postions
The candidate will be responsible for Device driver subsystem development
for a next generation telecom product. Responsibilities include design,
development and integration of the software.
· Requires 5 to 8 years of experience in real-time embedded software
development.
· Experience with MPC860/8260, C/C++, VxWorks/pSOS/OSE is a must.
· Experience with telecommunication product development is required.
· Experience with writing device drivers for optical communication
modules is a plus.
· BSEE or BSCS, Masters preferred
 
Sr. Software Engineer, Datacom Development
The candidate will be responsible for Optical Supervisory Channel subsystem
development for a next generation telecom product. Responsibilities include
architecture definition, design, development and integration of the
software.
· Requires 5 to 8 years of experience in real-time embedded software
development.
· Experience with porting network layer protocols like IP or OSI
protocol stacks is a must.
· Experience with C/C++ and pSOS/OSE/VxWorks is required.
· Experience with SONET DCC or DWDM OSC is required.
· BSEE or BSCS, Masters preferred
 
Systems Engineering
Chief Architect
Join Xtera to help drive the definition of its product family. Work with the
marketing and engineering groups to understand customer needs and define the
product architectures and functions to fill those needs. The successful
candidate will have the demonstrated capability of driving hardware,
software, and physical architectures and working with the design teams
through product release.
· Requires 10 plus years of relevant architecture development
experience.
· BSCS or BSEE (MS Preferred)
 
Marketing
Technical Marketing Manager
Provide content and create application notes, technical articles, technical
training material, RFI/P responses, data sheets, sales presentations, case
studies, and other marketing collateral in the DWDM market space. Gather,
refine and analyze market, customer and competition data to construct and
justify economic business cases in support of company products and
strategies. Explore applications of company products into new and existing
telecommunications networks. Generate strategic solutions per customers'
networks or products.
Present technical and economics papers at industry conferences. Develop and
deliver technical, product and training presentations to customers, sales
and partners.
Collaborate as a team member, enabling sharing of knowledge and resources
with the marketing and engineering departments.
· Minimum 5 years in telecom product management, marketing or product
architecture.
· Technical experience in optical networking preferred.
· Excellent written and communications skills required.
· Bachelors degree required
Operations
Optical Manufacturing Engineer
Requires experience taking complex fiber optic assemblies with both passive
and active optical components from development into production. Optical
contract manufacturing experience a plus.
Requires 5+ years of experience.
Some travel required.
BS or equivalent
 
HARDWARE ENGINEER - ANALOG, DWDM LONG-HAUL FIBER COMPANY
Primary analog designer working closely with other engineers on the architectural, functional, and physical systems partitioning of state-of-the-art DWDM systems. Candidate will also be involved in system feasibility studies including power, real estate, cost and performance.
-Minimum 8 years exp in telecom, preferably in DWDM or SONET.
-Exp in low signal level amplifier design, A/D, D/A, & I/F to optical devices.
-Understand signal integrity issues, termination, control impedance, EMI/ESD, etc.
-Involved in 2 projects for complete life cycle.
-BSEE required, MSEE preferred.
 
 
HARDWARE ENGINEER - TECHNICAL LEAD, DWDM LONG-HAUL FIBER COMPANY
Lead architectural, functional, and physical system partitioning of state-of-the-art DWDM systems. Lead system and unit level feasibility studies including power, real estate, cost and performance. Lead requirements definition, high-level architecture, interfaces definition, detail module design, module test, and system integration.
-Minimum 8 years in telecocm, specifically DWDM, HW module, and shelf level designs.
-Experience in analog design, digital design, FPGA design and exp in I/F to optical devices.
-Involved in minimum 2 projects from planning to release stage, including HW/SW integration required.
-Knowledge of Bellcore standards is mandatory.
-BSEE required, MSEE preferred.
 
 
PROCESSOR BOARD DESIGNER, DWDM LONG-HAUL FIBER COMPANY
Module level requirement definition, module architecture, module level design specification document, schematic capture, helping with PCB layout, modulte level testing, and integration of the module into the overall system.
-Minimum 5 years experience in telecom, preferably in DWDM control sub-system development.
-Microprocessor based board level design experience, preferably with Motorola Power QUICC II (MPC8260).
-Involved in minimum 1 project from planning to release stage, including HW/SW integration required.
-FPGA design experience a big plus.
-BSEE required, MSEE preferred.
 
 
FPGA DESIGNER, DWDM LONG-HAUL FIBER COMPANY
Responsibilities include FPGA requirement definition, FPGA level architecture, design specification document, coding, simulation, synthesis, layout, post layout simulation, testing and integration of FPGA in the overall system.
-Minimum 5 years experience in telcom, preferably DWDM or SONET.
-Experience with Xilinx or Altera FPGA design, Verilog and/or VHDL, simulation/synthesis tools.
-Involved in minimum of 1 project from planning to release stage, including HW/SW integration required.
-Board level design experience a big plus.
-BSEE required. MSEE preferred.
 
 
CAD TOOLS ENGINEER, DWDM LONG-HAUL FIBER COMPANY
Responsibilities include support for CAD tools used for schematic capture, PCB layout, & FPGA design. Provide additional scripts, software programs, and documentation to enhance tools acquired from commercial SW vendors.
-Minimum 5 years experience as a CAD tools engineer.
-Candidate shall be familiar with Cadence Concept, Allegro, Mentor FPGA Advantage tools.
-BSEE or BSCS required.
 
 
COMPLEX MODULE SPECIALIST, DWDM LONG-HAUL FIBER COMPANY
Responsible for high density, thermally challenging module level design of state of the art DWDM products at both concept & detailed design stages. Will work closely with electronics and optics engineers.
-Minimum 8 years in telecom, preferably DWDM module and shelf level packaging designs.
-Experience designing for thermal, EMI, airflow, cabling, fiber management and NEBS compliance using
sheet metal, injection molded plastic, machining, and casting.
-Experience with ProEngineer and Unix development environment a must.
-Involved in minimum of two projects from planning to release stage required.
-Knowledge of Bellcore standards is mandatory.
-BSME requried. MSME preferred.
 
 
MODULE SPECIALIST, DWDM LONG-HAUL FIBER COMPANY
Responsilbe for the module level design of state of the art DWDM products at both concept and detailed design stages. Will work closely with electronics and optics engineers in designing products.
-Minimum 5 years experience in telecom, preferably with DWDM module & shelf level packaging designs.
-Experience designing for thermal, EMI, airflow, cabling, fiber mgmt, and NEBS compliance using sheet metal,
injection molded plastic, maching and casting.
-Experience with ProEngineer and Unix environment a must.
-Involved in minimum 1 project from planning to release stage required.
-Knowledge of Bellcore standards is mandatory.
-BSME required. MSME preferred.
 
 
SENIOR SOFTWARE ENGINEER - EMBEDDED SYSTEMS DEVELOPMENT, DWDM LONG-HAUL FIBER COMPANY
Responsible for development of next generation telecom product, including design, development, and integration of the software.
-Requires 5 to 8 years experience in real-time embedded systems development for telecom tranmission products.
-Experience with C/C++, VxWorks/pSOS/OSE is a must.
-Experience with one or more of the following is required.
1. Inter Processor Communications
2. Software Download / Software Upgrades
3. Database Backup, Recovery, & Restoration.
-BSEE or BSCS required. Masters preferred.
 
 
SENIOR SOFTWARE ENGINEER, PLATFORM DEVELOPMENT, DWDM LONG-HAUL FIBER COMPANY
Responsible for Kernel sub-system development for next generation telcom product. Responsibilities include architecture, design, development, and integration of the software.
-Requires 5 to 8 years experience in real-time embedded software development.
-Experience with Kernel development, board support Packages, Control plane design, device drivers, MPC860
or MPC8260, C/C++, pSOS/OSE/VxWorks is a must.
-Experience with telecom product development is a plus.
-BSEE or BSCS required, Masters preferred.
 
 
SENIOR SOFTWARE ENGINEER, OPTICAL MODULE DEVICE DRIVERS DEVELOPMENT, DWDM LONG-HAUL FIBER COMPANY
Responsible for Device driver subsystem development for next generation telecom product, including design, development, and integration of the software.
-Requires 5 to 8 years of experience in real-time embedded software development.
-Experience with MPC860/8260, C/C++. VxWorks/pSOS/OSE is a must.
-Experience with telecom product development is required.
-Experience with writing device drivers for optical communication modules is a plus.
-BSEE or BSCS required, Masters preferred.
 
 
SENIOR SOFTWARE ENGINEER, DATACOM DEVELOPMENT, DWDM LONG-HAUL FIBER COMPANY
Responsible for Optical Supervisory Channel subsystem development for next generation telecom products, including architecture definition, design, development, and integration of the software.
-Requires 5 to 8 years of experience in real-time embedded sofware development.
-Experience with porting network layer protocols like IP or OSI protocol stacks is a must.
-Experience with C/C++ and pSOS/OSE/VxWorks is required.
-BSEE or BSCS required, Masters preferred.
 
 
CHIEF ARCHITECT, DWDM LONG-HAUL FIBER COMPANY
Will drive definition of the product family. Will work with marketing and engineering groups to understand customer needs and define the product architectures.
-Demonstrated capability of driving HW/SW and physical architectures & working with design team through
product release.
-Requires 10 plus years of relevant architecture development experience.
-BSCS or BSEE, Masters preferred.
 
 
TECHNICAL MARKETING MANAGER, DWDM LONG-HAUL FIBER COMPANY
Provide content and create application notes, technical articles, and other marketing collateral in the DWDM market space. Gather, refine, and analyze market, customer and competition data to construct and justify economic business cases in support of company products and strategies. Present technical and economic papers at industry conferences.
-Minimum 5 years in telecom product management, marketing or product architecture.
-Technical experience in optical networking preferred.
-Excellent writtena nd communications skills required.
 
 
OPTICAL MANUFACTURING ENGINEER
Requires experience taking complex fiber optic assemblies with both passive and active optical components from development into production. Optical manufacturing experience a plus.
-Requires 5+ years experience.
-Some travel required.
-BS or equivalent.

Return to The FOA Home Page


(C)1999-2001, The Fiber Optic Association, Inc.